Tiss B., Martínez-Martínez D., Mansilla C., Le Baron E., Disdier A., Cunha L.
Applied Surface Science, vol. 703, art. no. 163394, 2025
The authors regret that their published article contains the following errors: an inaccuracy in Section 2 - Experimental Details and an additional mistake in the references list. 1- Correction in Section 2: Experimental Details:The substrate dimensions were incorrectly stated. The original text reads: “Titanium dioxide (TiO<sub>2</sub>) and zinc oxide (ZnO) thin films of different thickness were deposited by reactive magnetron sputtering on microscope glass (7.6 × 7.6 × 1 cm<sup>3</sup>), monocrystalline silicon (110) (1 × 1 × 0.05 cm<sup>3</sup>), cork (2 × 1 × 1 cm<sup>3</sup>) and three types of rubber…” This should be corrected to: “Titanium dioxide (TiO<sub>2</sub>) and zinc oxide (ZnO) thin films of different thickness were deposited by reactive magnetron sputtering on microscope glass (7.6 × 2.6 × 0.1 cm<sup>3</sup>), monocrystalline silicon (110) (1 × 1 × 0.05 cm<sup>3</sup>), cork (2 × 1 × 0.1 cm<sup>3</sup>) and three types of rubber…” 2- Correction in reference [29]There is an error in reference [29]. The original entry reads: “S. Gürgen, Cork-Based Materials in Engineering: Design and Applications for Green and Sustainable Systems, Springer Nature (2024). To change.” The phrase “To change” should be removed. The corrected reference should read: “S. Gürgen, Cork-Based Materials in Engineering: Design and Applications for Green and Sustainable Systems, Springer Nature (2024).” >. The authors would like to apologise for any inconvenience caused.
